Toottoot :: Model Train and Scenery Retailer and Supplier

Listings 351 to 400 of 475 items First Page All Pages Last Page Previous Page Next Page
LGB50613	Triple Layer Piers 12 pieces	NZ$48.00 (export price NZD$41.74)


LGB50614	Track Mounting Piers 36 pieces	NZ$70.57 (export price NZD$61.37)


LGB50650	Crossing Gates	NZ$180.57 (export price NZD$157.02)


LGB50720	Distribution Box	NZ$63.82 (export price NZD$55.50)


LGB51070	Analog Throttle Indoor 5A	NZ$438.45 (export price NZD$381.26)


LGB51079	New Items 2015 :: Electronic Locomotive Controller 5 Amps	NZ$318.13 (export price NZD$276.63)
	This new electronic locomotive controller for analog operation offers the latest technology for high operating current and modern features for your analog operated LGB layout: maximum of 5 amps operating current suitable for use with any LGB transformer (DC or AC). This controller is recommended for use with the 51095 100 watt switched mode power pack. Very fine control and smoothed DC voltage. Naturally this controller can be converted for radio remote control (with LGB 55050/55055). Adjustable control range: +/- 135? with a zero position in the center / booster button with programmable acceleration Stop/Halt button. LED indicators for Stop overload ready for operation and direction of travel. Connections for wire up to 1.5 square millimeters in cross section / approximately 15/16 gauge protected against short circuits. Output: 0-24 volts DC. Operating current: maximum 5 amps. Dimensions 160 x 120 x 95 mm / 6-5/16 x 4-3/4 x 3-3/4.

LGB51090	Switch Mode Power Pack for LGB 36W Weatherproff (IP67) for use with 51099	NZ$104.90 (export price NZD$91.22)


LGB51095	New Items 2011 Schaltnetzteil 100 Watt IN STOCK GERMANY	NZ$220.87 (export price NZD$192.06)


LGB51099	Locomotive Controller for use with 51090	NZ$82.95 (export price NZD$72.13)


LGB51400	Family Figures	NZ$55.78 (export price NZD$48.50)


LGB51404	Worker Figures	NZ$63.82 (export price NZD$55.50)


LGB51405	Swiss Railroad Worker Figures	NZ$63.82 (export price NZD$55.50)


LGB51406	American Railraod Worker Figures	NZ$63.82 (export price NZD$55.50)


LGB51420	Tourist Seated	NZ$55.78 (export price NZD$48.50)


LGB51430	Worker Figures Set 1	NZ$55.78 (export price NZD$48.50)


LGB51755	New Items 2014 :: Control Box for 4 points, signals or uncouplers	NZ$160.40 (export price NZD$139.48)
	Control Box This control box can be used to operate up to four LGB turnouts, signals, uncoupler tracks, or other accessories. Each momentary rocker switch operates an accessory item. This control box is connected to a source of alternating current (18 volts) by means of the connections on the rear of the control box. An LED indicates whether the control box is being supplied with current. Color-coded connections on the rear of the control box facilitate connections. Adhesive labels are included to identify what is connected to a switch on the control box. 126 x 116 x 66 mm / 5" x 4-9/16" x 2-5/8".

LGB51805	New Items 2014 :: Control Box for 4 Track Circuits	NZ$160.40 (export price NZD$139.48)
	Control Box This multifaceted control box can be used to turn up to four electrical circuits on and off. Examples would be electrically separated track blocks or street lights. Each toggle switch is used to turn a current circuit on or off. Depending on your requirements, you can connect this control box by means of its side plugs to direct or alternating current. An LED indicates when the control box is being supplied with current. Color-coded connections on the rear of the control box facilitate connections. Adhesive labels are included to identify what is connected to a switch on the control box. 126 x 116 x 66 mm / 5" x 4-9/16" x 2-5/8".

LGB51910	Forward Signal Vr0 Vr1	NZ$225.70 (export price NZD$196.26)


LGB51920	Home Signal Hp0 Hp1	NZ$256.84 (export price NZD$223.34)


LGB51940	Home Signal Hp0 Hp2	NZ$290.57 (export price NZD$252.67)


LGB51950	RhB Light Signal	NZ$177.96 (export price NZD$154.75)


LGB51960	American Semaphore Signal	NZ$177.96 (export price NZD$154.75)


LGB52120	Analog Throttle Outdoor 5A	NZ$324.30 (export price NZD$282.00)


LGB52121	Analog Throttle 5A Panel Mount	NZ$264.62 (export price NZD$230.10)


LGB52390	Passenger Figures Seated Set 2	NZ$55.78 (export price NZD$48.50)


LGB52400	Train Crew Figures	NZ$55.78 (export price NZD$48.50)


LGB52443	Orient Express Figures Seated	NZ$63.82 (export price NZD$55.50)


LGB52445	Dining Figures Seated	NZ$63.82 (export price NZD$55.50)


LGB52450	1900s Figures Seated Set 2	NZ$63.82 (export price NZD$55.50)


LGB53001	New Items 2019 :: Set of Figures for Railroad Workers in Germany	NZ$73.23 (export price NZD$63.68)
	Set consisting of four figures of DB train crew people.

LGB53002	New Items 2019 :: Set of Figures for Railroad Workers in Switzerland	NZ$73.23 (export price NZD$63.68)
	Set consisting of four figures of SBB train crew people or other Swiss railroads such as the RhB.

LGB53003	New Items 2019 :: Set of Figures for Workers	NZ$73.23 (export price NZD$63.68)
	Set consisting of four figures of workers as would be used on different railroads for construction work.

LGB53004	New Items 2019 :: Set of Figures for a Family	NZ$73.23 (export price NZD$63.68)
	Set consisting of four figures (parents and children) that can be used as passengers on a station platform or also for all kinds of layout decoration.

LGB55015	Universal Remote	NZ$430.65 (export price NZD$374.48)


LGB55016	Loco Remote	NZ$352.82 (export price NZD$306.80)


LGB55017	New Items 2019 :: RC3 Radio Handheld Controller	NZ$683.70 (export price NZD$594.52)
	This is a radio handheld controller for wireless remote control of locomotives and working items by means of the CS2 and CS3 central controllers. The large range also makes this controller usable for large garden railroad layouts. The graphic display has a high level of contrast and is easy to read even in direct sunlight. It also has background lighting for operation at twilight and night. Two (2) different locomotives / powered units can be controlled at the same time. They can be called up with the Central Station. Sixteen (16) or thirty-two (32) functions can be controlled, depending on the configuration of the CS 2 or CS3. Up to 4,095 turnouts and signals can be controlled. This controller can be used in analog operation together with the 51079 locomotive controller to control a locomotive / powered unit. This controller can be updated with the RC3 radio receiver and the CS3.Three (3) AA batteries are required for operation. They are not included with this controller.A 55057 RC3 radio receiver is required for connection to the CS2 / CS3. This is not included with this controller.Size 185 x 80 x 35 mm / 7-1/4" x 3-1/8" x 1-3/8".

LGB55019	New Items 2014 :: Connection Cable Booster to CS2	NZ$34.95 (export price NZD$30.39)
	Connecting Cable (Verbindungskabel) Connecting cable for hooking the MTS Power Booster to the M?rklin CS2 to boost power and digital signal.

LGB55022	MTS-Small Loco Decoder 28x14mm	NZ$191.19 (export price NZD$166.25)


LGB55026	MTS Decoder Interface Cable page 105	NZ$29.78 (export price NZD$25.90)


LGB55028	New Items 2014 :: Retrofit Locomotive Decoder	NZ$205.66 (export price NZD$178.83)
	Locomotive Decoder (Nachr?st-Lok-Decoder) This decoder is suitable for using your locomotive in digital operation (DCC, DC, Mfx) as well as in analog operation. It can handle a maximum of 2 LGB motors. It can be installed in all LGB locomotives and powered units with one or two motors starting in 2014 and it can be installed in the 20220 Allegra. This decoder can be installed in earlier locomotives and powered units provided that you also use the 55529 interface connector adapter. This decoder has 2 light and 6 function outputs, overload and temperature protection, programmable special functions and connecting wire for the LGB DCC interface connector. Technical data: Total load capacity: maximum 4 amps / motor output: maximum 3 amps. Function overview: locomotive address can be programmed in the range 1-10239 / 14 or 28 speed levels, 128 speed levels can be recognized / the load control in analog + digital can be adapted to different types of locomotives / serial and parallel control for all light and function outputs / programmable blinking light and short term functions / programmable pulse generator functions. These and other functions can be programmed with the Universal Hand Controller (LGB 55015) or the MTS PC decoder programming module (LGB 55045) or with all M?rklin Central Stations.

LGB55029	New Items 2019 :: Retrofit Sound Decoder	NZ$415.10 (export price NZD$360.96)
	This decoder can be used for digital operation (DCC, mfx) as well as in analog operation (DC). All LGB locomotives and powered rail cars produced starting in 2014 with the 28-pin interface can thereby be converted. Many units with the old 10-pin interface can be converted using the 55529 interface adapter. Units without an interface can be converted using the interface circuit board included with this decoder. Size of the interface circuit board approximately 65 x 40 mm / 2-1/2" x 1-9/16".A speaker box is also included, but other speakers with compatible electrical values can also be connected.Compared to the previous decoder the performance data have been clearly increased and furthermore this decoder offers considerably more functions and programming options. The decoder can be programmed easily with the M„rklin Decoder Tool (https://www.maerklin.de/de/service/downloads/neu-nachruest-decoder-mld3msd3/mdecodertool-mdt3/) and can be adapted to individual requirements. Using the Internet, the option exists for access to the extensive sound library that has been expanded specially by a large number of well-known LGB models and that is constantly being expanded. Technical Data:- Total load max. 10 amps, motor output > 4 amps- Audio performance (sound) 6.7 watts / 4 Ohms- Locomotive address can be programmed 1-10239 - 14 or 28 (128) speed levels- Load control can be adapted to analog and digital on different types of locomotives- Parallel control for all light and function outputs- Programmable blinking light and short term functionsThese and other functions can be programmed with the M„rklin CS 2 and CS 3 central units as well as the M„rklin Mobile Station.

LGB55045	MTS PC Decoder Programming Module	NZ$191.19 (export price NZD$166.25)


LGB55050	RC Wireless Transmitter	NZ$230.88 (export price NZD$200.77)


LGB55055	RC Wireless Receiver	NZ$409.89 (export price NZD$356.43)


LGB55057	New Items 2019 :: RC3 Radio Receiver	NZ$390.67 (export price NZD$339.71)
	This is a radio receiver for the wireless 55017 RC3 sender. It can be connected CAN Bus cable on the unit to the CS2 and CS3 in digital operation. The connecting cable included with this receiver is for the analog 51079 locomotive controller to control a locomotive / powered unit. A maximum of eight (8) 55017 RC3 senders can be assigned. This receiver can be updated with the CS3.Size 68 x 78 x 20 mm / 2-11/16" x 3-1/16" x 3/4".

LGB55085	New Items 2014 :: New MTS-Loop Module	NZ$205.66 (export price NZD$178.83)
	MTS Reverse Loop Module (New) (MZS-Kehrschleifenmodul) New reverse loop module for the new digital LGB system world. You can switch the reverse loop on your digital layout automatically and free of short circuits. You will protect your digital layout and the rolling stock in the process. One more advantage of the reverse loop module: Several reverse loops can be used simultaneously on the layout. Reverse loop modules in use up to now cause a short circuit when the train enters the reverse loop and force the polarity of the track to switch by causing a break in the voltage, example: 55080. This new MTS reverse loop module by comparison switches free of short circuits; and interruption of the voltage in the track is avoided. The overloading of the MTS central unit by the intentionally caused short circuit is thereby a thing of the past. This protects above all track components such as locomotive decoders, turnout decoders, and the electronics customarily installed in locomotives and cars. This module is compatible with the previous components. Notes: Due to technical changes, the previous MTS reverse unit model (LGB 55081) is being discontinued and replaced by the new 55085 version. This new module is suitable to a limited extent for analog operation. This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm / 3-1/8" x 2-3/4" x 3/4".

LGB55085	New Items 2015 :: MTS Reverse Loop Module (New)	NZ$198.80 (export price NZD$172.87)
	New reverse loop module for the new digital LGB system world. You can switch the reverse loop on your digital layout automatically and free of short circuits. You will protect your and interruption of the voltage in the track is avoided. The overloading of the MTS central unit by the intentionally caused short circuit is thereby a thing of the past. This protects above all track components such as locomotive decoders, turnout decoders, and the electronics customarily installed in locomotives and cars.This module is compatible with the previous components. Notes:Due to technical changes, the previous MTS reverse unit model (LGB 55081) is being discontinued and replaced by the new 55085 version. This new module is suitable to a limited extent for analog operation. This product is not weatherproof and must be protected from moisture. 80 x 70 x 20 mm / 3-1/8 x 2-3/4" x 3/4"." digital layout and the rolling stock in the process. One more advantage of the reverse loop module: Several reverse loops can be used simultaneously on the layout. Reverse loop modules in use up to now cause a short circuit when the train enters the reverse loop and force the polarity of the track to switch by causing a break in the voltage example: 55080. This new MTS reverse loop module by comparison switches free of short circuits

LGB55106	MTS Starter Set III includes 55006 55016	NZ$810.31 (export price NZD$704.62)


LGB55129	New Items 2019 :: Adapter Circuit Board for Decoder Programmer	NZ$75.67 (export price NZD$65.80)
	This is an adapter circuit board to allow the new 55029 large railroad decoder to be plugged into the M„rklin 60971 decoder programmer. This makes an easier connection to a PC / Laptop. The M„rklin Decoder Tool Software is still required and it can be downloaded easily from our homepage (www.maerklin.de unter Service/Downloads/Nachrstdecoder/mLD3/mSD3). This will allow you to download existing or self-recorded sounds easily. Other settings such as maximum speed, braking behavior, etc. can be programmed quickly and simply with it.

LGB55429	New Items 2019 :: Power Storage Device	NZ$122.07 (export price NZD$106.15)
	This is a power storage device for connecting to the 55029 large railroad decoder. It can be used to allow smaller sections of track without current to be traversed by locomotives equipped with this system with no problem. It is simply plugged into the decoder. Size 36 mm x 24 mm x 23 mm / 1-7/16" x 15/16" x 7/8", cable length 200 mm / 7-7/8".

Listings 351 to 400 of 475 items First Page All Pages Last Page Previous Page Next Page

We accept Visa and Master Card or Direct Deposit and of course Cash/EFTPOS in person at our shop
Invercargill Shop 84 Glengarry Crescent, Glengarry, Invercargill 9810 Phone 03 352 7578 or 03 217 0572, Cell for voice or Txt 027 433 7809 email		Shop Hours Wednesday to Friday 10:00am - 5:30pm Saturday: 10:00am - 12:30pm Tuesday: By Appointment Only Sunday and Monday Closed
Copyright toottoot.co.nz 2019
Prices are subject to change and include GST
Please note the account number change
Bank Account :: (ANZ) 06 0925 0827499 00
Toottoot.co.nz is the trading name for Action Toys LTD


In stock	Not in stock	Not available from Manufacture

All prices are in New Zealand dollars and include appropriate taxes