Toottoot :: Model Train and Scenery Retailer and Supplier-Peco

Listings 1 to 50 of 150 items First Page All Pages Last Page Next Page
PECIL1	Peco - Code60 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 609mm Rail Section Dimentions Rail Height: 1.57mm Rail Head Width: 0.76mm Rail Base Width: 1.24mm Matches Z Gauge Streamline and also suitable for 4mm scale conductor rail.	NZ$14.97 (export price NZD$13.02)


PECIL11	Peco - Rail Nails Individulay ComponentsBrass, Round head nails for fixing down track and many other uses.	NZ$5.62 (export price NZD$4.89)


PECIL111	Peco - Wood Type Sleepers Individulay Components 33.5mm x 3.5mm (approx. 96 per pack) brown moulded plastic Best suited for use with Code 82 Flat Bottom Rail (Item No IL-115).	NZ$6.77 (export price NZD$5.89)


PECIL112	Peco - Pandrol Type Rail Fixings Individulay Components (approx. 200 per pack)Best suited for use with Code 82 Flat Bottom Rail (Item No IL-115), assemble using the 3-way track gauge (Item No. IL-116) and some liquid styrene cement.	NZ$9.76 (export price NZD$8.49)


PECIL113	Peco - Slide Rail Fixings Individulay Components (approx. 42 per pack)Best suited for use with Code 82 Flat Bottom Rail (Item No IL-115), assemble using the 3-way track gauge (Item No. IL-116) and some liquid styrene cement.	NZ$8.07 (export price NZD$7.02)


PECIL114	Peco - Turnout Sleepering Individulay Components 88mm x 4mm (approx. 32 per pack) Best suited for use with Code 82 Flat Bottom Rail (Item No IL-115).	NZ$7.97 (export price NZD$6.93)


PECIL116	Peco - Stainless Steel Track Gauge Individulay Components For 16.5, 18.2, and 18.83 gauges. Best suited for IL-115 and IL-3.	NZ$8.08 (export price NZD$7.03)


PECIL120	Peco - Conductor Rail Chairs Individulay Components(100 per pack) These accurately detailed mouldings are a slide fit onto Peco Code 60 Rail (IL-1). A separate baseplate is included to allow for different rail heights. Ideal for S.R.	NZ$13.90 (export price NZD$12.09)


PECIL121	Peco - Moulded Concrete Type Sleepers (with separate rail fixings) Individulay Components(96 sleepers with 200 seperately moulded rail fixings)32mm x 3.5mm (base), 3mm (top) Moulded in realistic concrete colour plastic, the rigid six-sleeper units enable straight track to be accurately and	NZ$18.88 (export price NZD$16.42)


PECIL13	Peco - Rail Spikes Individulay Components Chemically Blackened Steel, Square Section spikes for fixing down rail.	NZ$9.28 (export price NZD$8.07)


PECIL20	Peco - Flat Bottom Fishplates Individulay Components Nickel Silver, 6.5mm length, for joining Code143 Flat Bottom rail.	NZ$3.09 (export price NZD$2.69)


PECIL21	Peco - Bullhead Fishplates Individulay Components Nickel Silver, 6.5mm length, for joining Code124 Bullhead rail.	NZ$3.09 (export price NZD$2.69)


PECIL3	Peco - Code75 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 1.90mm Rail Head Width: 0.78mm Rail Base Width: 1.72mm Matches OO/HO Streamline Fine.	NZ$21.50 (export price NZD$18.70)


PECIL4	Peco - Code80 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 2.03mm Rail Head Width: 0.63mm Rail Base Width: 1.39mm Matches N Streamline Universal.	NZ$22.50 (export price NZD$19.57)


PECIL5	Peco - Code100 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 2.5mm Rail Head Width: 1.04mm Rail Base Width: 2.28mm Matches OO/HO Setrack, OO/HO Streamline Universal and O-16.5 Streamline.	NZ$23.85 (export price NZD$20.74)


PECIL702	Peco - Running Rail Chairs Individulay Components(100 per pack) Injection moulded chairs for Code124 Bullhead Rail (O Gauge).	NZ$10.06 (export price NZD$8.75)


PECIL703	Peco - Slide Rail Chairs Individulay Components(50 per pack) Injection moulded chairs for Code124 Bullhead Rail (O Gauge).	NZ$4.74 (export price NZD$4.12)


PECIL706	Peco - Frog & Wing Rails Individulay Components(1 set per pack) Machined from Code124 Nickel Silver Bullhead Rail (O Gauge).	NZ$8.17 (export price NZD$7.10)


PECIL708	Peco - Turnout Blades / Brackets Individulay Components(1 set per pack) Machined from Code124 Nickel Silver Bullhead Rail (O Gauge).	NZ$21.25 (export price NZD$18.48)


PECIL709	Peco - Frog & Wing Rails Individulay Components(1 set per pack) Machined from Code143 Nickel Silver Flat Bottom Rail (O Gauge).	NZ$33.48 (export price NZD$29.11)


PECIL710	Peco - Turnout Blades / Brackets Individulay Components(1 set per pack) Machined from Code143 Nickel Silver Flat Bottom Rail (O Gauge).	NZ$19.53 (export price NZD$16.98)


PECIL712	Peco - Pandrol Type Rail Fastenings Individulay Components (100 per pack) Injection moulded fastenings best suited for use with Code143 Flat Bottom Rail (Item No IL-7FB).	NZ$11.06 (export price NZD$9.62)


PECIL713	Peco - Slide Rail Fastenings Individulay Components (48 per pack)Moulded baseplates best suited for use with Code143 Flat Bottom Rail (Item No IL-7FB).	NZ$6.37 (export price NZD$5.54)


PECIL714	Peco - Moulded Wood Grain Sleepering Individulay Components 175mm lengths (20 per pack) Best suited for use with O Gauge Rail.	NZ$7.33 (export price NZD$6.37)


PECIL7BH	Peco - Code124 Bullhead Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 3.15mm Rail Head Width: 1.52mm Rail Base Width: 1.85mm Matches O Streamline Bullhead.	NZ$29.33 (export price NZD$25.50)


PECIL7FB	Peco - Code143 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 3.63mm Rail Head Width: 1.60mm Rail Base Width: 3.20mm Matches O Streamline Flat Bottom.	NZ$32.50 (export price NZD$28.26)


PECIL8	Peco - Code200 Bullhead Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 5.08mm Rail Head Width: 2.46mm Rail Base Width: 2.87mm Matches Gauge 1 and SM-32 Streamline.	NZ$62.25 (export price NZD$54.13)


PECIL83	Peco - Code83 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 2.10mm Rail Head Width: 0.787mm Rail Base Width: 1.70mm Matches rail in 83 line range.	NZ$20.32 (export price NZD$17.67)


PECIL9	Peco - Code250 Flat Bottom Rail Individulay Rail Sections (6 per pack) Rail Length: 914mm Rail Section Dimentions Rail Height: 6.35mm Rail Head Width: 2.79mm Rail Base Width: 4.06mm Matches G-45 Streamline.	NZ$89.39 (export price NZD$77.73)


PECLK55	Well Type Turntable Kit 305mm deck length, 327mm overall diameter. (Hole required 309mm, minimum clearance below baseboard 31mm). This kit contains detailed plastic mouldings, rail and electrical contacts.	NZ$131.99 (export price NZD$114.77)


PECPL1	Peco - Replacement Point Springs Complete with cover	NZ$1.10 (export price NZD$0.96)


PECPL10	Peco - Standard Turnout Motor The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco Turnout.	NZ$23.75 (export price NZD$20.65)


PECPL10E	Peco - Turnout Motor with Extended Operating Pin This is the motor to use if you do not wish to cut a large hole in your baseboard, a 9.5mm hole will allow the operating pin to move the tie-bar.	NZ$18.50 (export price NZD$16.09)


PECPL10W	Peco - Turnout Motor for Low-Amperage Power Supply Specially wound coils make this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers.	NZ$18.40 (export price NZD$16.00)


PECPL10WE	Peco - Low-Amp Turnout Motor with Extended Operating Pin This version combines the low current coils of the PL010W with the PL010Es extended drive pin.	NZ$23.81 (export price NZD$20.70)


PECPL11	Peco - Side Mounted Turnout Motor Designed to clip onto the side of a Setrack or Streamline OO/HO Code 100 Turnout.This motor eliminates the need for cutting or drilling holes in the baseboard and comes with colour coded wires already attached.	NZ$32.50 (export price NZD$28.26)


PECPL12X	Peco - Motor Adaptor Bases 2 per pack To mount Peco Turnout Motors above the baseboard (spring not included). Wherever access under the baseboard is not possible, this Adaptor Base with extension link allows the turnout to be operated from the trackside.	NZ$3.99 (export price NZD$3.47)


PECPL13	Peco - Accessory Switch for PL-10 motor A useful and inexpensive switch, easily fitted underneath a PL010 Series Turnout Motor. Provides single pole changeover switching for the frog.	NZ$10.20 (export price NZD$8.87)


PECPL15	Peco - Twin Microswitch Kit directly fits PL-10 motor (not included) Easy to assemble unit with two single pole changeover microswitches which gives double the switching capacity of a PL013.	NZ$23.60 (export price NZD$20.52)


PECPL17	Peco - Switching Probe A simple yet effective method of switching turnouts. Studs (item PL-18) located on a track plan are wired to motors which are operated by touching the appropriate stud with the probe which carries the 16v ac power supply.	NZ$7.18 (export price NZD$6.24)


PECPL18	Peco - Studs and Tag Washers for use with PL-17 Probe (not included) When located on a track plan, these studs are wired to motors which are operated by touching the appropriate stud with the probe (PL-17) which carries the 16v ac power supply.	NZ$7.97 (export price NZD$6.93)


PECPL26B	Peco - Passing Contact Changeover Switch with Black Lever Provides the short burst of current required to operate the PL010 Turnout Motor.	NZ$19.00 (export price NZD$16.52)


PECPL26R	Peco - Passing Contact Changeover Switch with Red Lever Provides the short burst of current required to operate the PL010 Turnout Motor.	NZ$19.00 (export price NZD$16.52)


PECPL26W	Peco - Passing Contact Changeover Switch with White Lever Provides the short burst of current required to operate the PL010 Turnout Motor.	NZ$18.05 (export price NZD$15.70)


PECPL26Y	Peco - Passing Contact Changeover Switch with Yellow Lever Provides the short burst of current required to operate the PL010 Turnout Motor.	NZ$18.05 (export price NZD$15.70)


PECPL34	Peco - Wiring Loom for PL-10 Turnout Motor2 looms per pack Makes wiring the PL-10 series motors quick and easy. Just a simple push fit onto the motor terminals, while the other ends are tinned and ready for a screw terminal block. No soldering required.	NZ$14.50 (export price NZD$12.61)


PECPL35	Peco - Capacitor Discharge Unit For use with all solenoid type motors PL-10 series, PL-11 etc Connect the unit to the 16v AC supply on your transformer. The capacitor in this unit stores up power and discharges a kick to ensure turnout blades snap over every time.	NZ$51.80 (export price NZD$45.04)


PECPL50	Peco - Turnout Switch ModuleFor use with PL-26 series switches (not included) Holds 3 switches as is, or easily expandable with removable ends that allow additional PL-51 Module Add-ons. Push-button wiring system! push to open, release to close and lock wires in place.	NZ$51.99 (export price NZD$45.21)


PECPL51	Peco - Switch Module Add-OnFor use with PL-50 Turnout Switch Module Simply remove end of PL-50 and plug in add-on unit. Holds switches from the PL-26 range (not included).	NZ$16.34 (export price NZD$14.21)


PECPL80	Power Feed Joiners 4 Pairs per pack Suitable for OO/HO Code100: O-16.5/On30 Code100: and O Scale Code124 Bull Head rail profiles These new Power Feed Joiners will help address the worries of soldering that many modellers have: theyre safe, clean and tidy way of bringing	NZ$16.99 (export price NZD$14.77)


Listings 1 to 50 of 150 items First Page All Pages Last Page Next Page

We accept Visa and Master Card or Direct Deposit and of course Cash/EFTPOS in person at our shop
Christchurch Shop 219 Whites Rd, Ohoka, RD2, Kaiapoi 7692 Northern Motorway, Tram Road Exit. Phone 03 352 7578 view map email		Shop Hours Tuesday to Friday 10:00am - 3:00pm Saturday 10:00am - 12:00pm Other hours by appointment only Sunday and Monday Closed
Copyright toottoot.co.nz 2018
Prices are subject to change and include GST
Bank Account :: (Westpac) 03 0854 0750032 000
Toottoot.co.nz is the trading name for Stevenson Stewardship LTD


In stock	Not in stock	Not available from Manufacture